When you're thirsty, nothing is better for you than a glass of water. All you have to do is turn on the tap and fill your glass, open a bottle of water, or go to your refrigerator's water dispenser. According to the World Health Organization, every year approximately 1.6 million people die from illnesses (usually severe diarrhea) due to drinking unsafe water as it is contaminated and unclear. Another side effect of lack of access to clean water is gender inequality. The chore of gathering water for the family usually rests upon the shoulders of female family members, especially girls. If girls are gathering water all day, then they don't have time to go to school. Thus, access to clean water can result in a population that is not only healthier, but that is better educated, and more able to help improve their community because they are not sick. In the year 2000, the United Nations member countries put together the Millennium Development Goals. The purpose of this program is to reduce poverty and hunger, to tackle ill health, gender inequality, lack of education, lack of access to clean water, and environmental ruin. Access to clean water plays a big part in reaching many of the Millennium Development Goals.
I wanted to do an experiment that was education and taught me something new. While doing this science project, I thought about all the important science and technology that exists to improve people's lives, like devices to clean their water! I realised that, if we give the people in these unfortunate counties the necessities needed to build their own water filters they will be able to filter their own water and 1.6 million people's lives would be saved annually due to them having access to clean water.
Sunday, 6 March 2016
Friday, 4 March 2016
Constructing the Water Filter
On the 3/03/2016 and 4/03/2016 I completed my SRP experiment at school. I really enjoyed doing this but before I talk about my experiment I would like to mention the preparation I did leading up to the experiment.
A few days before my experiment I went to Bunnings and Woolworths and bought some of the materials needed for my experiment. I did not end up using the charcoal in my filter because I sourced this material from my house fire and when I was putting the filter together realised that the charcoal was not 'activated' meaning that it would not work in my experiment (I will go into more detail about this in my discussion). Then the night before my experiment I constructed my natural water filter using the method provided below:
1. Use a rubber band and secure the filter paper to the mouth of the bottle with it bottom cut off.
2. Measure out 1 cup of pebbles, 1 cup of fine sand and 1 cup of course sand. Rinse the pebbles in the water carefully three times to remove any dust. Put the sand in another bowl. Rinse the sand in water carefully three times. Swish the sand in the water then let it settle before your drain off the water.
3. Pour the pebbles in the bottle. Then pour the course sand on top of that. Then pour the fine sand on top of the course sand. Below is my finished 'Natural Water Filter'. I tested the filter by filtering tap water through it. This filter was used in my own experiment.
A few days before my experiment I went to Bunnings and Woolworths and bought some of the materials needed for my experiment. I did not end up using the charcoal in my filter because I sourced this material from my house fire and when I was putting the filter together realised that the charcoal was not 'activated' meaning that it would not work in my experiment (I will go into more detail about this in my discussion). Then the night before my experiment I constructed my natural water filter using the method provided below:
| Materials Needed for my Natural Water Filter |
1. Use a rubber band and secure the filter paper to the mouth of the bottle with it bottom cut off.
2. Measure out 1 cup of pebbles, 1 cup of fine sand and 1 cup of course sand. Rinse the pebbles in the water carefully three times to remove any dust. Put the sand in another bowl. Rinse the sand in water carefully three times. Swish the sand in the water then let it settle before your drain off the water.
3. Pour the pebbles in the bottle. Then pour the course sand on top of that. Then pour the fine sand on top of the course sand. Below is my finished 'Natural Water Filter'. I tested the filter by filtering tap water through it. This filter was used in my own experiment.
Tuesday, 1 March 2016
Results Table
Prior to my experiment I have decided to create a results table in which I can record my results during my experiment. I have created a table using Microsoft Word. It is important to organize my results in a clear way and I feel as though a table will do just that. This will help me with the process of conducting my results and for the process of making my graph.
Below is my a copy of my results table which I have constructed to record my results in an organized fashion:
Turbidity of
Liquids before and after they are naturally filtered
Liquid
|
Turbidity
of liquid before it is filtered (NTU)
|
Turbidity
of liquid after it is filtered
(NTU)
|
Dirty
water
|
||
Soapy
Water
|
||
Coca-Cola
|
||
Black
Tea
|
The units in which Turbidity is measured in is NTU: Nephelometric Turbidity Units. The instrument used for measuring turbidity and that I will be using is called a turbidity meter which measures the intensity of light scattered at 90 degrees as a beam of light passes through a water sample.
Natural Water Filter (Background Research)
Today I visited my local bunnings warehouse to buy the materials needed to make the natural water filter. A natural water filter is a filter which is made of natural materials such as pebbles, sand and charcoal in which removes dirt and other substances from a liquid.
Importance of Clean Water
Water covers two-thirds of the Earth's surface and makes up about 60% of adult's bodies, including 75% of our brains! Each day we need to consume more than two liters of water through liquids we drink and foods we eat. Although there's plenty of H2O around, much of it is either inaccessible or inconsumable to humans due to its cleanliness. But with water treatment, we're able to purify water and get clean drinking water that can be used in many poorer countries in the world who do not have access to clean water.
How does it work?
| Materials I brought from Bunnings |
| Example of the Water Filter I will be constructing |
Water covers two-thirds of the Earth's surface and makes up about 60% of adult's bodies, including 75% of our brains! Each day we need to consume more than two liters of water through liquids we drink and foods we eat. Although there's plenty of H2O around, much of it is either inaccessible or inconsumable to humans due to its cleanliness. But with water treatment, we're able to purify water and get clean drinking water that can be used in many poorer countries in the world who do not have access to clean water.
How does it work?
Each time the water passes through a different layer, it
becomes cleaner. First, the gravel/rock layer catches large pieces of debris, such
as twigs, leaves, and bugs. Next, the sand layer catches smaller particles,
such as dirt and grit, and makes the water look clean. Finally, the charcoal
layer gets rid of bacteria and some chemicals and the fine sand layer extracts even smaller particles that the other layers could not pick up.
I have also been to Woolworths to gather items for my experiment including: coffee filter paper, plastic spoons and cups and Coca-Cola etc.
Monday, 29 February 2016
Approved Plan + Materials, Method and Risk Assessment
Last Wednesday I handed in my experiment and in today's lesson we got I got my SRP plan back and it was approved! With a mark of 4 out of a total 4 marks, I was given constructive, helpful feedback that will guide me for my 'experimental report'. My teacher told me that I need to include the different variables in brackets in my method, so whilst doing my experiment I am aware of what variables I need to control. I am grateful for the feedback i received and will definitely take it into consideration when writing up my experimental report.
I am very glad that my experiment was approved meaning that I can begin to prepare for my experiment. But before I start my experiment, I would like to give you a brief outline of my plan including my materials list, risks involved with the experiment and a brief method. In my SRP Plan I have made sure to include the word 'repeat' in order to achieve reliable results. I look forward to completing my experiment on the 3/03/16 and the 4/04/16.
I am very glad that my experiment was approved meaning that I can begin to prepare for my experiment. But before I start my experiment, I would like to give you a brief outline of my plan including my materials list, risks involved with the experiment and a brief method. In my SRP Plan I have made sure to include the word 'repeat' in order to achieve reliable results. I look forward to completing my experiment on the 3/03/16 and the 4/04/16.
Materials:
Natural Water Filter
2L
soft drink bottle (with the bottom cut off)
·
Large
beaker
·
Cup
measurement
·
Bowls
x4
· 1 cups fine sand
· 1 cups course sand
· 1 cups small pebbles
· 10-12
cup coffee filter paper
·
Rubber
bands
Experiment
·
Turbidity
meter with attached Data Logger
·
Liquid
measuring cup
·
1
Teaspoon measurement
·
1
Tablespoon measurement
·
Plastic
cups; clear (9~ 2 for each of the 4 liquids and 1 for a comparison water
sample)
·
Small
bowl of garden dirt
·
2
tablespoons of washing detergent
·
¼
teaspoon of vegetable oil
·
Tap
water
·
1
cup of soft drink (Coca-Cola)
·
1
tea bag (English breakfast)
·
Electric
kettle
·
1
Mug
·
Plastic
spoons (1 box approx)
·
Medicine
dropper
·
Timer
Risk Assessment:
( here are just a few of the main risks that are involved in my experiment)
Risk
|
How this risk will be minimised
|
Spillage
of different liquids can cause slipping hazards.
|
Clean
up split liquids immediately after they are spilt.
|
Handling
the kettle can cause danger of burns from appliance, hot water or steam.
Danger of electrocution, especially in wet areas or if wiring is defective.
|
Handle
the kettle with care and check fittings and wiring for damage each time
before use. Test and tag at regular intervals.
|
Breaking
the ceramic mug could cause cuts on hands and fingers
|
Do
not handle broken cups with bare fingers. Sweep up the broken pieces
immediately using a brush and dustpan, do not use finger.
|
Boiling
water can cause burns
|
Handle
boiling water with care and pour gently away from yourself
|
Method: (I have split it into two sections, one where i construct the filter and one where i carry out the experiment)
Constructing
the Filter
- Use the rubber band to secure the filter paper to the mouth of the bottle with it bottom cut off. Place the filter upside down in the beaker.
- Rinse the gravel in the water carefully three times to remove any dust. Put the sand in another bowl. Rinse the sand in water carefully three times. Swish the sand in the water then let it settle before your drain off the water. Open a packet of active carbon and put it in a clean bowl. Clean the active carbon the same way as you have cleaned the sand. Repeat these steps to clean the pebbles the same way that you have cleaned the sand, removing any dust.
- Pour the activated carbon in the bottle. Then pour the pebbles on top of that. Then pour the fine sand on top of the course sand.
- Carefully pour clean tap water through the filter (to test it), being careful not to disturb the top layer of sand. Pour the rinsed water out of the beaker.
Testing
the Filter
- Make a contaminated water sample: Using a clean plastic spoon, mix 1 cup of water in a small bowl with garden dirt. Add ¼ teaspoon of vegetable oil with a medicine dropper to the water mixture, approximately 4-6 drops. Mix the oil and the dirt together until everything is combined into the water. Pour the dirty water into a clear plastic cup.
- Test the turbidity of the contaminated water using a turbidity meter. Record the turbidity of the water sample and then begin the filtering process.
- Carefully place the filter upside down in the beaker. Slowly pour half of the water mixture into the filter. The water should move between each section of the filter drop by drop. Meanwhile, continue to mix the contaminated sample with a spoon so the dirt doesn’t settle at the bottom of the cup.
- Once the contaminated water is filtered retest the turbidity of the water and compare the turbidity of the contaminated water to the turbidity of the filtered water. You should also record any other observations that you make about the filtered water. For example, if the filtered water has any grit or dirt still visible in it after it has been filtered. Place the filtered water in a plastic cup and rinse the beaker.
- Boil 1 cup of water in an electric kettle. Place the teabag in the mug and pour the cup of boiling water into the mug and let it sit for 15 minutes (timed) undisturbed. Remove and discard the tea bag and let the tea cool down as you proceed with the following steps.
- Place 1 cup of soft drink in a clear plastic cup. Test the turbidity of the soft drink using a turbidity meter. Carefully place the filter upside down in the clean beaker. Slowly pour half of the soft drink into the filter, and watch as it moves between the filter drop by drop.
- Once filtered, test the turbidity of the filtered soft drink and compare it to the turbidity of the unfiltered soft drink. Making notes about whether the soft drink is as clear as water or is still colored and not clear at all and pour into a clear plastic cup. Rinse the beaker.
- Repeat steps 6-8 using 1 cup of tea (prepared earlier), recording the turbidity of the liquid before and after it is filtered. Pour the filtered tea into a plastic cup and rinse the beaker.
- Repeat steps 6-8 using 1 cup of water mixed with washing detergent, to create bubbles, recording the turbidity of the liquid before and after it is filtered. Pour the filtered soapy water into a plastic cup and rinse the beaker.
- Repeat steps 1-12 two more time using clean materials (you can wash and reuse the plastic cups and use the remaining liquids you've already prepared), testing the turbidity before and after filtering each liquid and rinsing the beaker each time you have filtered a liquid by pouring the liquid into a clear plastic cup. This will make sure your results are reliable, reproducible and repeatable.
Monday, 22 February 2016
Final Idea/ Hypothesis
Hi all, I have finally decided on a science experiment problem that I am happy with and that will work with all the guidelines of the experiment. My idea follows 'Does the
turbidity of different liquids change when they are naturally filtered?'.
My hypothesis for this idea is 'The turbidity of the dirty water will change the most drastically when it is filtered.'
I have arrived at this hypothesis due to the background research I have completed. In the dirty water I will be adding a small bowl of garden dirt to 1 cup of water and 1/4 teaspoon of vegetable oil. The turbidity of a liquid is the cloudiness or haziness of a fluid caused by large numbers of particles that are generally invisible to the naked eye. The measurement of turbidity is a key test of water quality. When a liquid is filtered (such as dirty water) the particles are removed during the filtration process and commonly you are left with clear water. The particles have been removed when the liquid is filtered therefore making the liquid clear with decreases the turbidity of the water. The other liquids I am testing such as soft drink, black tea and soapy water do not contain as large particles as the dirty water (as the soil does not dissolve) therefore when these liquids are filtered they may not change there turbidity as drastically as the dirty water. This is the reasoning for arriving at my suggested hypothesis. I look forward to completing this experiment.
My hypothesis for this idea is 'The turbidity of the dirty water will change the most drastically when it is filtered.'
I have arrived at this hypothesis due to the background research I have completed. In the dirty water I will be adding a small bowl of garden dirt to 1 cup of water and 1/4 teaspoon of vegetable oil. The turbidity of a liquid is the cloudiness or haziness of a fluid caused by large numbers of particles that are generally invisible to the naked eye. The measurement of turbidity is a key test of water quality. When a liquid is filtered (such as dirty water) the particles are removed during the filtration process and commonly you are left with clear water. The particles have been removed when the liquid is filtered therefore making the liquid clear with decreases the turbidity of the water. The other liquids I am testing such as soft drink, black tea and soapy water do not contain as large particles as the dirty water (as the soil does not dissolve) therefore when these liquids are filtered they may not change there turbidity as drastically as the dirty water. This is the reasoning for arriving at my suggested hypothesis. I look forward to completing this experiment.
Thursday, 11 February 2016
New Ideas
After much consideration, thinking and research I have decided to change my problem idea, whilst still keeping the same theme of filtration. Instead of testing the purity of the water extracted from different liquids when they are filtered, I have decided to investigate 'If filtering different liquids causes the pH of the substance to change'. I feel as though when researching how to complete different elements in my experiment such as 'how to test the purity of water' and 'how to extract water from different liquids' I released that these processes would have taken me a lot of time and are complex. I am confident with my new experimental problem and have begun my plan. I look forward to completing this experiment to the best of my ability.
Some websites which I have used to research my experimental problem include:
- http://www.dataloggerinc.com/tutorials/data_logger_ph_measurement.php
- http://cas.umn.edu/assets/pdf/Harris%20-%20Water%20Filtration%20Competition.pdf
- https://www.youtube.com/watch?v=OMZpzcItQkc
Subscribe to:
Posts (Atom)

